Skip to main content

Keymaps & Behaviors

ZMK uses a declarative approach to keymaps instead of using C code for all keymap configuration. Right now, ZMK uses the devicetree syntax to declare those keymaps; future work is envisioned for supporting dynamic loading of declarative keymaps, e.g. over USB Mass Storage or via a custom BLE service.

note

For advanced users looking to implement custom behaviors for their keymaps, this will be possible in the future by allowing user configs to add to the CMake application built by Zephyr.

Big Picture

All keyboard definitions (complete boards or shields) include the default keymap for that keyboard, so ZMK can produce a "stock" firmware for that keyboard without any further modifications. For users looking to customize their keyboard's behavior, they can copy the stock .keymap file into their user config directory, and customize the keymap to their liking.

Behaviors

ZMK implements the concept of "behaviors", which can be bound to a certain key position, sensor (encoder), or layer, to perform certain actions when events occur for that binding (e.g. when a certain key position is pressed or released, or an encoder triggers a rotation event).

For example, the simplest behavior in ZMK is the "key press" behavior, which responds to key position (a certain spot on the keyboard), and when that position is pressed, send a keycode to the host, and when the key position is released, updates the host to notify of the keycode being released.

For the full set of possible behaviors, see the overview page for behaviors.

Layers

Like many mechanical keyboard firmwares, ZMK keymaps are composed of a collection of layers, with a minimum of at least one layer that is the default, usually near the bottom of the "stack". Each layer in ZMK contains a set of bindings that bind a certain behavior to a certain key position in that layer.

Diagram of three layers
A simplified diagram showing three layers. The layout of each layer is the same (they all contain four keys), but the behavior bindings within each layer can be different.

In addition to the base default layer (which can be changed), certain bound behaviors may also enable/disable additional layers "on top" of the default layer.

When a key location is pressed/released, the stack of all active layers from "top to bottom" is used, and the event is sent to the behavior bound at that position in each layer, for it to perform whatever actions it wants to in reaction to the event. Those behaviors can choose to "handle" the event, and stop it from being passed to any lower layers, or may choose to "pass it along", and let the next layer in the stack also get the event.

Behavior Bindings

Binding a behavior at a certain key position may include up to two extra parameters that are used to alter the behavior when that specific key position is activated/deactivated. For example, when binding the "key press" (kp) behavior at a certain key position, you must specify which keycode should be used for that key position.

&kp A

In this case, the A is actually a define for the raw HID keycode, to make keymaps easier to read and write.

For example of a binding that uses two parameters, you can see how "mod-tap" (mt) is bound:

&mt LSHIFT D

Here, the first parameter is the set of modifiers that should be used for the "hold" behavior, and the second parameter is the keycode that should be sent when triggering the "tap" behavior.

Keymap File

A keymap file is composed of several sections, that together make up a valid devicetree file for describing the keymap and its layers.

Includes

The devicetree files are actually preprocessed before being finally leveraged by Zephyr. This allows using standard C defines to create meaningful placeholders for what would otherwise be cryptic integer keycodes, etc. This also allows bringing in other devicetree nodes from separate files.

The top two lines of most keymaps should include:

#include <behaviors.dtsi>
#include <dt-bindings/zmk/keys.h>

The first defines the nodes for all the available behaviors in ZMK, which will be referenced in the behavior bindings. This is how bindings like &kp can reference the key press behavior defined with an anchor name of kp.

The second include brings in the defines for all the keycodes (e.g. A, N1, C_PLAY) and the modifiers (e.g. LSHIFT) used for various behavior bindings.

Root devicetree Node

All the remaining keymap nodes will be nested inside of the root devicetree node, like so:

/ {
// Everything else goes here!
};

Keymap Node

Nested under the devicetree root, is the keymap node. The node name itself is not critical, but the node MUST have a property compatible = "zmk,keymap" in order to be used by ZMK.

    keymap {
compatible = "zmk,keymap";

// Layer nodes go here!
};

Layers

Each layer of your keymap will be nested under the keymap node. Here is a sample that defines just one layer for this keymap:

    keymap {
compatible = "zmk,keymap";

default_layer {
// --------------------------------------------------------------------------------------------------------------------------------------------------------------------
// | ESC | Q | W | E | R | T | | Y | U | I | O | P | \ |
// | TAB | A | S | D | F | G | | H | J | K | L | ; | ' |
// | SHIFT | Z | X | C | V | B | CTRL+A | CTRL+C | | CTRL+V | CTRL+X | N | M | , | . | / | R CTRL |
// | GUI | DEL | RETURN | SPACE | ESCAPE | | RETURN | SPACE | TAB | BSPC | R ALT |
bindings = <
&kp ESC &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BSLH
&kp TAB &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT
&kp LSHIFT &kp Z &kp X &kp C &kp V &kp B &kp LC(A) &kp LC(C) &kp LC(V) &kp LC(X) &kp N &kp M &kp COMMA &kp DOT &kp FSLH &kp RCTRL
&kp LGUI &kp DEL &kp RET &kp SPACE &kp ESC &kp RET &kp SPACE &kp TAB &kp BSPC &kp RALT
>;

sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp PG_UP PG_DN>;
};
};

Each layer should have:

  1. A bindings property this will be a list of behavior bindings, one for each key position for the keyboard.
  2. (Optional) A sensor-bindings property that will be a list of behavior bindings for each sensor on the keyboard. (Currently, only encoders are supported as sensor hardware, but in the future devices like trackpoints would be supported the same way)

Complete Example

Putting this all together, a complete kyria.keymap looks like:

#include <behaviors.dtsi>
#include <dt-bindings/zmk/keys.h>

/ {
keymap {
compatible = "zmk,keymap";

default_layer {
// --------------------------------------------------------------------------------------------------------------------------------------------------------------------
// | ESC | Q | W | E | R | T | | Y | U | I | O | P | \ |
// | TAB | A | S | D | F | G | | H | J | K | L | ; | ' |
// | SHIFT | Z | X | C | V | B | CTRL+A | CTRL+C | | CTRL+V | CTRL+X | N | M | , | . | / | R CTRL |
// | GUI | DEL | RETURN | SPACE | ESCAPE | | RETURN | SPACE | TAB | BSPC | R ALT |
bindings = <
&kp ESC &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BSLH
&kp TAB &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SEMI &kp SQT
&kp LSHIFT &kp Z &kp X &kp C &kp V &kp B &kp LC(A) &kp LC(C) &kp LC(V) &kp LC(X) &kp N &kp M &kp COMMA &kp DOT &kp FSLH &kp RCTRL
&kp LGUI &kp DEL &kp RET &kp SPACE &kp ESC &kp RET &kp SPACE &kp TAB &kp BSPC &kp RALT
>;

sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp PG_UP PG_DN>;
};
};
};